AXIAL PISTONS

PUMPS

C series is a family of variable displacement axial piston pumps for use in closed circuits.
The displacement is infinitely variable by means of a tilting swash plate, the oil flow can be reversed over the neutral point. Various controls are available: manual, servocontrol lever operated, electric etc..
Each pump is provided with a charge pump that makes up for internal lea- kage, maintains a positive pressure in the main circuit and provides oil to the control system. All pumps have maximum pressure relief valves and can be supplied single or tandem version.
Different through drive options are available for auxi- liary pump mounting as well as a wide range of options: by- pass valve, pressure filter and others.

Technical card  

C1 14-18 series is a family of variable displacement axial piston pumps for use in closed circuits with housing and distributor cover in aluminium.
The displacement is continuously variable by means of a tilting swash plate, and the oil flow direction is reversible.
The following range of controls is available:

• Manual lever with feed-back
• Manual with zeroingbr
• Manual without zeroing
• Hydraulic proportional without feed-back
• Hydraulic proportional with feed-back
• Electric two position (ON-OFF)
• Electric impulsebr>
• Electric proportional with feed-back
• Electric proportional without feed-back

Two through drive options for auxiliary pump mounting and two options are available:

• Pressure filter
• Through drive - Bosch Gr.1
• Through drive - Bosch Gr.2
• Through drive - SAE “A” 9T - 16/32-DP

Peak operations must not excide 1% of every minute.
A simultaneus maximum pressure and maximum speed are not recommended.

Notes:
(1) The displacements 14-18 use the same external casing.
((2) The values shown are valid for an absolute pressure (pass) of 1 bar (14.5 psi])at the suction inlet port an when operated on mineral oil.